Lab & capabilities
Designed, simulated and measured in-house
An RF bench to 6 GHz, a Ryzen 9 / RTX 5090 simulation workstation backed by a 100+ core cluster, open-source EDA and EM tools, and in-house prototyping for fixtures and enclosures.
RF bench
Test equipment
Real-time spectrum analyzer + signal generator · to 6 GHz
Aaronia SPECTRAN V6
One hybrid instrument for spectrum, power, ACPR and EVM measurements, plus CW and modulated stimulus. Scripted through its API for automated characterization.
2-port vector network analyzer · 100 kHz – 6 GHz
LibreVNA
S-parameters for filters, matching networks, antennas, cables and transitions, exported as Touchstone for simulation and comparison.
About calibration. These instruments are functionally verified but not calibrated. They are well suited to bring-up, tuning, debugging and comparative (A/B) measurements. When a result must be traceable to a calibration, the measurement is done at an accredited lab.
Simulation
Compute
EM simulation is compute-bound. Dedicated hardware means finer meshes, more sweep points and answers the same day.
Simulation workstation
- CPU
- AMD Ryzen 9 9950X3D · 16 cores / 32 threads
- Memory
- 96 GB DDR5
- Storage
- 2 × 4 TB PCIe 5.0 NVMe
- GPU
- NVIDIA GeForce RTX 5090
Interactive EM (FDTD) and circuit simulation, layout and analysis. Large, fine-meshed structures solve in memory, and GPU acceleration is available for solvers that support it.
In-house compute cluster
- CPU
- 100 threads across a five-node cluster
- Memory
- 336 GB RAM
- Storage
- ~300 TB raw
- GPU
- NVIDIA GeForce RTX 5080
Batch parameter sweeps, tolerance and Monte Carlo studies, and optimization runs in parallel overnight, plus long-term storage of simulation results.
Software
Design & analysis tools
KiCad
Schematic capture and PCB layout, with scripted rule checks
openEMS
3D FDTD electromagnetic simulation of transitions, vias and structures
QUCS
Circuit and S-parameter simulation with vendor models
Python
Analysis, cascade and link-budget models, field solving, test automation
Commercial tools (Altium Designer, Ansys HFSS, Keysight ADS, Cadence Microwave Office) are licensed per project when a client’s workflow or files require them.
Prototyping
From files to hardware
Turnkey PCB fabrication and assembly
Prototype boards built and assembled by established fab partners
Two large-format 3D printers
Enclosures, fixtures, test jigs and cable strain relief, including flame-retardant materials
Have a board, a spec or a problem in mind?
Start with a free 30-minute call. You’ll leave with a clear next step, whether or not we work together.